Combined-Hardness-Tester-NOVOTEST-T-UD3
Combined Hardness Tester NOVOTEST T-UD3 - Image 2
Combined Hardness Tester NOVOTEST T-UD3 - Image 3

Combined Hardness Tester NOVOTEST T-UD3

Alat uji kekerasan gabungan ini menggabungkan dua metode pengukuran kekerasan: Impedansi Kontak Ultrasonik (ASTM A1038) dan Leeb (ASTM A956). Hal ini menjadikan alat ini sebagai perangkat portabel yang paling serbaguna.

Category: Tags: , , , Brand:

Description

Lakukan pengukuran kekerasan, kalibrasi perangkat, atur tampilan nilai yang nyaman, simpan hasil pengukuran kekerasan, sinkronkan arsip dengan perangkat lain dan PC, transfer hasil pengukuran ke rekan kerja Anda – semua ini tersedia di ponsel pintar Anda berkat aplikasi NOVOTEST khusus untuk Android. Penguji kekerasan belum pernah memiliki kesempatan seperti ini! Dengan koneksi Bluetooth, ponsel pintar Anda terhubung ke penguji kekerasan dan Anda memiliki perangkat yang benar-benar baru – penguji kekerasan generasi baru! Antarmuka yang intuitif, banyak peluang untuk mendokumentasikan hasil, akses internet, layar sentuh, kamera, mikrofon, dan penerima GPS di ponsel pintar mengubah penguji kekerasan Anda menjadi sesuatu yang benar-benar unik dan sebelumnya tidak dapat diakses.

Dengan Aplikasi Lab NOVOTEST, Anda dapat:

  •  pengaturan dan kalibrasi alat uji kekerasan;
  •  menampilkan hasil pengukuran secara real-time dalam bentuk numerik dengan konstruksi grafik, histogram, atau statistik;
  •  mengambil gambar objek uji beserta penanda kekerasannya;membuat video produk yang dikontrol;
  •  merekam catatan audio
    dari objek yang diuji;
  •  menyimpan geolokasi pengukuran secara otomatis di Google Maps;
  •  menampilkan Google Maps dengan penanda lokasi pengukuran dan kemampuan untuk melihat hasil pengukuran tersebut;
  •  menampilkan kalender pengukuran (menyajikan arsip dalam bentuk pengukuran yang dikelompokkan berdasarkan tanggal);
  •  menyusun laporan akhir pengukuran yang komprehensif;
  •  mengirimkan laporan akhir melalui email, messenger (atau cara lain yang nyaman) langsung dari aplikasi;
  •  struktur arsip pengukuran yang fleksibel – sepenuhnya mirip dengan explorer biasa, dengan kemampuan untuk membuat folder dan file dengan nama apa pun;
  •  sinkronisasi dengan PC dan ponsel pintar lainnya; – layanan cloud untuk menyimpan arsip pengukuran;
  •  sinkronisasi otomatis dan manual arsip pengukuran cloud antar perangkat;
  •  meluncurkan mode navigasi Google, membangun rute, dan mendampingi ke titik pengukuran dilakukan
  •  kemampuan untuk menyimpan arsip perangkat lain dengan Bluetooth dalam satu aplikasi

T-D3-hardness-tester-1-1024x683 blue

Keunggulan utama Alat Uji Kekerasan Gabungan NOVOTEST T-UD3:

KEMAMPUAN MENGHUBUNGKAN KEDUA METODE PROBE TANPA MEMATIKAN PERANGKAT

Pengguna dapat mengukur kekerasan berbagai produk logam dengan bentuk, struktur, material, dan tingkat persiapan permukaan yang berbeda dalam satu unit, hanya dengan mengganti probe.

T-U3 hardness tester

PENGUKURAN BAGIAN KECIL

Dengan UCI, operator dapat mengukur produk kecil. Kami merekomendasikan komponen dengan berat mulai dari 100 gr dan ketebalan mulai dari 1 mm. Bahkan, dengan menggunakan Dudukan Uji Probe UCI NOVOTEST, komponen yang lebih tipis pun dapat diukur.

 

T-U3 hardness tester

 

PENGUKURAN PRODUK BENTUK KOMPLEKS

Selain itu, dengan bantuan probe ultrasonik, pengguna akan dapat menyelesaikan tugas pengukuran kekerasan alur, permukaan radius kecil, tempat yang sulit dijangkau, dan produk dengan bentuk kompleks.

 

T-U2 hardness tester

JEJAK KECIL PROBE JENIS UCI

Karena probe UCI memiliki kedalaman penetrasi hanya beberapa mikron, probe ini dapat digunakan untuk memproses produk dengan kebutuhan cetak tinggi (metode non-destruktif maksimum diperlukan), serta untuk mengukur kekerasan lapisan yang dikeraskan, seperti proses nitriding dan sementasi.

 

Operation under any conditions

MENGUKUR BAGIAN DENGAN PERMUKAAN YANG BURUK

Dengan menggunakan probe dinamis (probe Leeb), pengguna dapat menguji kekerasan produk masif dengan permukaan yang kurang dipersiapkan. Metode ini juga memungkinkan pengukuran produk dengan struktur berbutir kasar tanpa dispersi pengukuran yang signifikan.

 

 

 

 

 

 

T UD3

TERKALIBRASI UNTUK BERBAGAI BAHAN DAN SKALA

Berkat kalibrasi bawaan probe Leeb untuk berbagai bahan dan skala, perangkat ini menjadi alat universal untuk mengukur kekerasan pada sebagian besar logam umum.

 

T-U3-hardness-tester

KAMERA TERPASANG

Perangkat ini memiliki kamera terpasang, yang memungkinkan pengguna menyimpan arsip pengukuran gambar objek yang diuji dengan pengikatan kekerasan ke lokasi tertentu pada produk.

 

 

 

Penguji Kekerasan Gabungan NOVOTEST T-UD3 dapat digunakan dengan perangkat lunak khusus untuk beroperasi dengan arsip pengukuran yang tersimpan. Atau, setiap rekaman yang tersimpan dapat dicetak melalui printer nirkabel yang juga dapat dilengkapi dengan perangkat ini.

T-U3 hardness tester

Advantages

  • Small indenter imprint (suits for mirror surfaces of shafts necks, blades, gear teeth, etc.)
  • Measuring surface hardened layers hardness
  • Wide range of hardness testing
  • Various measurement modes
  • 88 combinations of materials and hardness scales (calibrations)
  • Calibration of any scale in any range
  • Convenience and ease of measurement
  • Optimized number of buttons
  • Large full-color graphic display with bright backlight
  • Built-in photo camera for thorough reports
  • Automatic probe types recognition
  • Connected probe types indication
  • The calibrations are stored in UCI probe memory
  • Extended operating temperature range (frost, down to – 40°C)
  • Internal memory and communication with a PC
  • New intuitive menu with tips on the buttons
  • Optional wireless mini printer
  • Waterproofed housing
  • Rubber bumper protected housing
  • Internal clock
  • Hardness value measuring for any mass products with more than 1 mm  thickness (small parts, thin-walled structures, pipes, tanks, steel sheets, articles of complex shape, hardness testing of metal coatings, etc.)
  • Different operating modes:
    • Graph – the graph building mode
    • Histogram – the histogram building mode
    • Statistics – provides statistics for the current set of measurements
    • Smart – filters the incorrect measurements
    • Signal – displays the probe signal (only for the Leeb probe

Spesification

UCI probe types
  • 1kgf (10N) 2.2 lbf
  • 5kgf (50N) 11lbf
  • 10kgf (98N) 22lbf
Leeb probe types
  • D
  • DC
  • DL
  • C
  • D+15
  • E
  • G
Measuring range
  • HRC:20~70
  • HB:90~650
  • HV:230~940
  • Tensile strength, MPa: 370~1740
  • User calibrations for any range (for example: HV100-3000)
Measuring accuracy
  • HRC: 2HRC
  • HB: 10HB
  • HV: 15HV
Standards
  • ASTM A1038
  • ASTM A956
Indenter UCI probe – Diamond indenter Leeb probe – Hardened ball
Measuring direction Any direction 360°
Data storage Limited only by the memory card up to 32Gb
Communication Upload data to PC and export as a spreadsheet (USB cable and software included )
Hardness scales
  • UCI probe – HRC, HB, HV, MPa
  • Leeb probe – HRC, HRB, HB, HV, HL, MPa
  • Additional custom scales for calibration
Materials
  • Ultrasonic (UCI) probe – pre-calibrated for steel
  • Dynamic (Leeb) pre-calibrated for steel, alloy steel, cast iron, stainless steel, aluminum, bronze, brass, copper
  • Additional custom materials for calibration
Data display
  • Load applied/contact (UCI)
  • Angle (Leeb)
  • Single test result
  • Max, Min, Average of tests
  • Number of tests,
  • Deviation
  • Var. coeff.
  • Histogram, Signal and Smart Modes (Filter of incorrect measurements).
Language
  • English
  • German
  • French
  • Polish
  • Russian *additional languages available by request
Indication Color LCD display (320×240)
Operating environment
  • Temperature:-20°C~40°C
  • Humidity: 30%~80%R.H.
Power supply DC 4,5V (3 pcs batteries AA)
Instrument dimensions 160x75x30mm
Net weight Approx. 0.3kg (without probe)
Gross weight (package) 2kg
Package dimensions, cm 33*27*10
Battery life Approx. 10 hours.
Warranty 3 (1+2) years
Package gross weight, kg 1.8-2kg

Available options

  • Protective Pouch with Straps for T-UD3
  • Android smartphone or tablet (optionally with IP65) for NOVOTEST Lab App
  • Additional UCI probes: – UCI Probe U1 L3 (10N/HV1) – UCI Probe U1 L3 (50N/HV5) – UCI Probe U1 L3 (98N/HV10)
98N (10 kgf) Special type of probe with increased load. To carry out the measurement, it is necessary to apply a load of 10 kgf (set automatically by the probe).Low surface cleanliness requirements.
  • Heat-treated and cemented parts with poorly prepared surface.
  • Measurement on blades, on the inner surface of pipes, holes with high roughness.
50N (5 kgf) The main type of probe for solving most hardness measurement tasks. To carry out the measurement, it is necessary to apply a load of 5 kgf (set automatically by the probe).Medium surface cleanliness requirements.
  • Heat-treated and cemented parts, such as shafts, turbines, gears, teeth, welds, heat affected zones.
  • Measurement in grooves, on teeth, in grooves, on radius surfaces.
  • Measurement on the blades, on the inner surface of the pipes, holes.
10N (1 kgf) Probe with reduced load – designed to measure the hardness of products with increased requirements for the size of the print (polished, polished surfaces), to measure the hardness of thin surface hardened layers. For the measurement, a load of 1 kgf must be applied.More demanding on surface cleanliness, compared with U1 (50N).
  • Nitrided and cemented surface layers of molds, dies, dies, thin-walled parts.
  • Bearings, tooth flanks, saws.
  • Hardness measurement of thin hardening coatings.
  • Measurement on products after thorough machining.
  • Device for measuring the hardness of thin sheets NOVOTEST U1-TL
  • Additional Leeb probes: – Dynamic probe Type DC-R – Dynamic probe Type DC-R-mini – Leeb probe Тype D – Leeb probe Type DL – Leeb probe Type G – Leeb probe Type D+15 – Leeb probe Тype C – Leeb probe Type E
  • Set of support rings for Leeb probe
  • Cable for Leeb probe
  • Impact bodies for Leeb probes
  • Hardness test blocks: For UCI probes: – Rockwell Hardness Test Block 25HRC (25±5 HRC) – Rockwell Hardness Test Block 45HRC (45±5 HRC) – Rockwell Hardness Test Block 65HRC (65±5 HRC) – Vickers Hardness Test Block 200HV (200±50 HV1) – Vickers Hardness Test Block 300HV (300±50 HV1) – Vickers Hardness Test Block 450HV (450±50 HV1) – Vickers Hardness Test Block 800HV (800±50 HV1) – Vickers Hardness Test Block 200HV (200±75 HV5) – Vickers Hardness Test Block 300HV (300±50 HV5) – Vickers Hardness Test Block 450HV (450±75 HV5) – Vickers Hardness Test Block 800HV (800±50 HV5) – Vickers Hardness Test Block 200HV (200±75 HV10) – Vickers Hardness Test Block 300HV (300±50 HV10) – Vickers Hardness Test Block 450HV (450±75 HV10) – Vickers Hardness Test Block 800HV (800±50 HV10) – Brinell Hardness Test Block 100НВ (100±25 HB 10/1000/10) – Brinell Hardness Test Block 200HB (200±50 HB 10/3000/10) – Brinell Hardness Test Block 300HB (300±50 HB 10/3000/10) – Brinell Hardness Test Block 400HB (400±50 HB 10/3000/10) – Brinell Hardness Test Block 600HB (600±50 HB 10/3000/10) For Leeb probes: – Leeb Hardness Test Block 530±40 HLD – Leeb Hardness Test Block 630±40 HLD – Leeb Hardness Test Block 790±40 HLD – Leeb Hardness Test Block HLG *other hardness test blocks are available as well.
  • Portable grinding machine
  • Wireless printer (by request)
  • Different colors of rubber bumper protected case
  • AA batteries
  • Battery chargers
  • Transportation plastic case for hardness tester
  • Calibration certificate issued by the third-party metrology laboratory (ILAC)
  • Certificate of origin issued by the Chamber of Commerce and Industry
  • Certificate of Origin and Quality from NOVOTEST
  • CE certificate
  • Extended warranty period up to 3 years
  • Individual modification to customer requirements

Standard package

“Basic” kit:
  • Electronic unit Combined Hardness Tester NOVOTEST T-UD3 (Lab)
  • UCI probe – 1pc (10N, 50N or 98N for choice)
  • Leeb D type probe – 1pc (other types by request)
  • Accessory package: – AA batteries – 3 pcs – USB charger – USB cable for PC – PC software: — Online – INFO/USB-connect — Offline – NOVOTEST USB-Connect – NOVOTEST LAB App for Android gadgets – Operating manual/Quick guide – Test certificate – Transportation plastic case

“Advanced 1” kit:  

  • Electronic unit Combined Hardness Tester NOVOTEST T-UD3 (Lab)
  • UCI probe – 1pc (10N, 50N or 98N for choice)
  • Leeb D type probe – 1pc (other types by request)
  • Protective Pouch with Straps for T-UD3
  • Hardness Test Block HRC, HB, HV (for UCI probe) – 1pc
  • Hardness Test Block HLD or HLG (for Leeb probe) – 1pc
  • Accessory package

“Advanced 2” kit: 

  • Electronic unit Combined Hardness Tester NOVOTEST T-UD3 (Lab)
  • UCI probe – 2pc (50N+10N or 98N)
  • Leeb D type probe – 1pc
  • Protective Pouch with Straps for T-UD3
  • Leeb probe Type DL or DC-R or DC-R mini or G
  • Hardness Test Block HRC, HB, HV (for UCI probe) – 1pc
  • Hardness Test Block HLD or HLG (for Leeb probe) – 1pc
  • Accessory package

“Advanced 3” kit: 

  • Electronic unit Combined Hardness Tester NOVOTEST T-UD3 (Lab)
  • UCI probe – 1pc (10N, 50N or 98N for choice)
  • Leeb D type probe – 1pc (other types by request)
  • Protective Pouch with Straps for hardness tester T-UD3
  • Hardness Test Block HRC or HB or HV (for UCI probe) – 3pcs
  • Leeb Hardness Test Block HLD or HLG (for Leeb probe) – 1pc
  • Device for measuring the hardness of thin sheets NOVOTEST U1-TL
  • Set of support rings for Leeb probe
  • Accessory package  

“Professional” kit:  

  • Electronic unit Combined Hardness Tester NOVOTEST T-UD3 (Lab)
  • UCI probe – 1pc (10N, 50N, 98N)
  • Leeb D type probe – 1pc
  • Protective Pouch with Straps for T-UD3
  • Leeb probe Type DL or DC-R or DC-R mini or G
  • Hardness Test Block HRC or HB or HV (for UCI probe) – 3pcs
  • Hardness Test Block HLD or HLG (for Leeb probe) – 1pc
  • Device for measuring the hardness of thin sheets NOVOTEST U1-TL
  • Set of support rings for Leeb probe
  • Accessory package

“Expert” kit: 

  • Electronic unit Combined Hardness Tester NOVOTEST T-UD3 (Lab)
  • UCI probe – 2pc (50N+10N or 98N)
  • Leeb D type probe – 1pc
  • Protective Pouch with Straps for T-UD3
  • Leeb probe Type DL or DC-R or DC-R mini or G
  • Rockwell Hardness Test Block 25HRC, 45 HRC, 65HRC (for UCI probe) – 3pcs
  • Brinell Hardness Test Block 100HB, 200HB, 400HB or other nominals (for UCI probe) – 3pcs
  • Vickers Hardness Test Block 200HV, 450HV, 800HV or other nominals (for UCI probe) – 3pcs
  • Hardness Test Block HLD or HLG (for Leeb probe) – 1pc
  • Device for measuring the hardness of thin sheets NOVOTEST U1-TL
  • Set of support rings for Leeb probe
  • Accessory package

Reviews

There are no reviews yet.

Be the first to review “Combined Hardness Tester NOVOTEST T-UD3”

Your email address will not be published. Required fields are marked *

Related products